| Setting up your dial-up networking
is easy. We've created these step-by-step instructions
to make it even easier.
To correctly set up your dial-up networking in Windows
NT 4, follow the steps below:
STEP 1
 |
Double click on My Computer |
STEP 2
 |
Double click on Dial-Up Networking |
STEP 3
If you receive a message stating that The
phonebook is empty..., then click OK
to add a new entry.
STEP 4
If Dial-up Networking (DUN) already
has other phone book entries, click New.
STEP 5
If the New Phonebook Entry Wizard
window appears, check the box labeled I know
all about phonebook entries... and click
Finish.
STEP 6
In the New Phonebook Entry dialog,
select the Basic tab.
STEP 7
Check Use Telephony
dialing properties.
STEP 8
Uncheck Use another port if busy.
STEP 9
For Entry name, enter CWS
Internet
STEP 10
Enter the country code and area
code of the number you are dialing, plus
the phone number itself.
STEP 11
Under Dial using, select
your modem.
STEP 12
Click the Configure button.
STEP 13
Set the Initial speed (BPS) to 19,200
if you have a 14.4k modem or 38,400 if you have a
28.8k modem.
STEP 14
Make sure all three Hardware Features boxes
are checked (if applicable)
and that Disable modem speaker is
unchecked.
STEP 15
Click the OK button.
STEP 16
Select the Server tab.
STEP 17
The Dial-up server type should be PPP: Windows
NT, Windows 95 Plus, Internet.
STEP 18
For Network Protocols only TCP/IP should
be checked.
STEP 19
Make sure Enable software compression
is checked, but Enable
PPP LCP extensions is unchecked.
STEP 20
Click the TCP/IP settings button.
STEP 21
Select Server assigned IP address
and Specify name server addresses.
STEP 22
In the Primary DNS text box, type
63.85.211.15
STEP 23
In the Secondary DNS text box, type
63.85.211.20
STEP 24
Leave the Primary WINS and
Secondary WINS servers at 0.0.0.0
STEP 25
Check both Use
IP header compression and Use default
gateway on remote network.
STEP 26
Click the OK button.
STEP 27
Select the Script tab.
STEP 28
Make sure None is selected.
STEP 29
Select the Security tab.
STEP 30
Select Accept any authentication including
clear text.
STEP 31
Click OK.
STEP 32
You will now be in the Dial-up Networking
program, and the phone book entry you just
created should be selected in the Phonebook
entry to dial text box.
STEP 33
Click the Dial button.
STEP 34
A window will appear asking for a username,
password, and domain. The first two
are required.
STEP 35
Do not enter anything
for the Domain.
STEP 36
There is also an option to Save Password,
which can be selected if desired.
STEP 37
Click OK to dial into the Internet.
STEP 38
Once you are connected, a window will appear informing
you that you have successfully connected to the Dial-up
Server. Click OK to close this window.
STEP 39
You are now connected and may use
any internet software such as Microsoft Internet Explorer
or Netscape Navigator.
Helpful hint:
You may want to place a shortcut to your dialup connection
on your desktop to make connecting to the Internet easier.
To do this, follow the directions below:
- Right click the CWS Internet icon.
- Choose Create Shortcut.
- A shortcut will appear. Simply click and drag it
to your desktop.
|
