| Setting up your dial-up networking
is easy. We've created these step-by-step instructions
to make it even easier. To correctly set up your dial-up
networking in Windows 2000 Professional, follow the
steps below:
STEP 1
Click the Start button, click Settings,
and choose Control Panel
STEP 2
Double-click the Network and Dial-up Connections
icon.
STEP 3
Double-click the Make New Connection
icon.
STEP 4
Click the Next button.
STEP 5
Select Dial-up to the Internet.
STEP 6
Click the Next button.
STEP 7
Select I want to set up my Internet connection
manually, or I want to connect through
a local area network (LAN).
STEP 8
Click the Next button.
STEP 9
Select I connect through a phone line and
a modem.
STEP 10
Click the Next button.
STEP 11
In the Area Code field, type the
area code of your local access number.
STEP 12
In the Telephone number field, type
your local access number.
STEP 13
Click the Advanced button.
STEP 14
Click on the Connection tab.
STEP 15
Click the PPP (Point to Point Protocol)
radio button in the Connection type area.
STEP 16
Check the box next to
Disable LCP Extensions.
STEP 17
Click the None
radio button in the Logon procedure area.
STEP 18
Click on the Addresses tab.
STEP 19
Click the Always
use the following radio button in the DNS
server address area.
STEP 20
In the Primary DNS server field,
type 63.85.211.15
STEP 21
In the Alternate DNS server field,
type 63.85.211.20
STEP 22
Click the OK button.
STEP 23
Click the Next button.
STEP 24
In the User name field, type your
CWS Internet username.
STEP 25
In the Password field, type your
CWS Internet password.
STEP 26
Click the Next button.
STEP 27
In the Connection Name field, type
CWS Internet.
STEP 28
Click the Next button.
STEP 29
Click the Yes
radio button in the Do you want to set up
an Internet mail account now area.
STEP 30
Click the Next button.
STEP 31
In the Display Name field, type
your name.
STEP 32
Click the Next button.
STEP 33
In the E-mail address field, type
your email address.
STEP 34
Click the Next button.
STEP 35
Click the down arrow on the My incoming mail
server is a __ server drop-down list and
choose POP3.
STEP 36
In the Incoming mail (POP3) server
field, type cwsmail.com
STEP 37
In the Outgoing mail (SMTP) server
field, type smtp.cwsmail.com
STEP 38
Click the Next button.
STEP 39
In the Account name field, type
your CWS Internet username.
STEP 40
In the Password field, type your
CWS Internet password.
STEP 41
Check the box next to
Remember password if you would like
to have your password saved.
STEP 42
Click the Next button.
STEP 43
Check the box next to
To connect to the Internet immediately...
if you would like to connect right away to the Internet.
STEP 44
Click the Finish button.
Congratulations! You have successfully
set up your dialup Internet access and are now ready
to connect to the Internet.
|
